867 Product Transfer and Resale Report MAUS

Functional Group ID=PT

Heading:

	Pos.	Seg.		Req.		Loop	
	No.	ID	Name	Des.	Max.Use	Repeat		
Must Use	0100	ST	Transaction Set Header	M	1									
Must Use	0200	BPT	Beginning Segment for Product Transfer and Resale	M	1									
Must Use	0500	DTM	Date/Time Reference	O	10									
Must Use	0700	PER	Administrative Communications Contact	O	3									
			LOOP ID - N1			>1								
Must Use	0800	N1	Party Identification	O	1									

Detail:

	Pos.	Seg.		Req.		Loop	
	No.	ID	Name	Des.	Max.Use	Repeat		
			LOOP ID - PTD			>1								
Must Use	0100	PTD	Product Transfer and Resale Detail	M	1									
Must Use	0200	DTM	Date/Time Reference	O	10									
	0300	REF	Reference Information	O	20									
Must Use	0475	LCD	Place/Location Description	O	2									
Must Use	0490	LQ	Industry Code Identification	O	>1									
Must Use	0495	MEA	Measurements	O	>1									
			LOOP ID - QTY			>1								
Must Use	1100	QTY	Quantity Information	O	1									
Must Use	1600	MEA	Measurements	O	40									
Must Use	2100	DTM	Date/Time Reference	O	10									
			LOOP ID - LM			>1								
Must Use	2600	LM	Code Source Information	O	1									
Must Use	2700	LQ	Industry Code Identification	O	100									

Summary:

	Pos.	Seg.		Req.		Loop	
	No.	ID	Name	Des.	Max.Use	Repeat		
Must Use	0300	SE	Transaction Set Trailer	M	1									

	Segment:	ST Transaction Set Header
	Position:	0100
	Loop:
	Level:	Heading
	Usage:	Mandatory
	Max Use:	1

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	ST01	143	Transaction Set Identifier Code	M	1 	ID 3/3	
 	867		Product Transfer and Resale Report	
Must Use	ST02	329	Transaction Set Control Number	M	1 	AN 4/9	

	Segment:	BPT Beginning Segment for Product Transfer and Resale
	Position:	0200
	Loop:
	Level:	Heading
	Usage:	Mandatory
	Max Use:	1

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	BPT01	353	Transaction Set Purpose Code	M	1 	ID 2/2	
	Statement Type	
 	00		Original	
 	05		Replace	
	Replacement	
 	14		Advance Notification	
Must Use	BPT03	373	Date	M	1 	DT 8/8	
	The measured volume audit statement issue date.	
Must Use	BPT04	755	Report Type Code	O	1 	ID 2/2	
 	R5		Technical Information	

	Segment:	DTM Date/Time Reference
	Position:	0500
	Loop:
	Level:	Heading
	Usage:	Optional (Must Use)
	Max Use:	10
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	DTM01	374	Date/Time Qualifier	M	1 	ID 3/3	
 	434		Statement	
Must Use	DTM05	1250	Date Time Period Format Qualifier	X	1 	ID 2/3	
 	DT		Date and Time Expressed in Format CCYYMMDDHHMM	
Must Use	DTM06	1251	Date Time Period	X	1 	AN 1/35	
	Statement Date/Time 	

	Segment:	PER Administrative Communications Contact
	Position:	0700
	Loop:
	Level:	Heading
	Usage:	Optional (Must Use)
	Max Use:	3
Notes:		For NAESB WGQ, the segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	PER01	366	Contact Function Code	M	1 	ID 2/2	
 	IC		Information Contact	
Must Use	PER02	93	Name	O	1 	AN 1/60	
	Contact Person (Name)	
Must Use	PER03	365	Communication Number Qualifier	X	1 	ID 2/2	
 	TE		Telephone	
Must Use	PER04	364	Communication Number	X	1 	AN 1/256	
	Contact Person (Phone) 	

	Segment:	N1 Party Identification
	Position:	0800
	Loop:	N1        Optional (Must Use)
	Level:	Heading
	Usage:	Optional (Must Use)
	Max Use:	1
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	N101	98	Entity Identifier Code	M	1 	ID 2/3	
	Refer to "N1 Segments (Heading)" table for usage and values.	
Must Use	N103	66	Identification Code Qualifier	X	1 	ID 1/2	
	Refer to "N1 Segments (Heading)" table for usage and values.	
Must Use	N104	67	Identification Code	X	1 	AN 2/17	
	Refer to "N1 Segments (Heading)" table for usage and values.

Device Station Number, Downstream Party/Downstream Party Proprietary Code, Location Code/Location Proprietary Code, Meter Operator/Meter Operator Proprietary Code, Preparer ID/Preparer ID Proprietary Code, Upstream Party/Upstream Party Proprietary Code

The data element maximum length indicated is reduced from that which is specified in the ASC X12 standards.	

	Segment:	PTD Product Transfer and Resale Detail
	Position:	0100
	Loop:	PTD        Mandatory
	Level:	Detail
	Usage:	Mandatory
	Max Use:	1

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	PTD01	521	Product Transfer Type Code	M	1 	ID 2/2	
 	FG		Flowing Gas Information	

	Segment:	DTM Date/Time Reference
	Position:	0200
	Loop:	PTD        Mandatory
	Level:	Detail
	Usage:	Optional (Must Use)
	Max Use:	10
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	DTM01	374	Date/Time Qualifier	M	1 	ID 3/3	
	Refer to "DTM Segments (Detail)" table for usage and values.	
Must Use	DTM05	1250	Date Time Period Format Qualifier	X	1 	ID 2/3	
	Refer to "DTM Segments (Detail)" table for usage and values.	
Must Use	DTM06	1251	Date Time Period	X	1 	AN 1/35	
	Refer to "DTM Segments (Detail)" table for usage and values.

Physical Meter Effective Date, Physical Meter Effective Time 	

	Segment:	REF Reference Information
	Position:	0300
	Loop:	PTD        Mandatory
	Level:	Detail
	Usage:	Optional
	Max Use:	20
Notes:		For NAESB WGQ, this segment is conditional.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	REF01	128	Reference Identification Qualifier	M	1 	ID 2/3	
 	CHR		Chromatograph Identifier	
Must Use	REF02	127	Reference Identification	X	1 	AN 1/30	
	Chromatograph

The data element maximum length indicated is reduced from that which is specified in the ASC X12 standards.	

	Segment:	LCD Place/Location Description
	Position:	0475
	Loop:	PTD        Mandatory
	Level:	Detail
	Usage:	Optional (Must Use)
	Max Use:	2
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	LCD02	98	Entity Identifier Code	O	1 	ID 2/3	
 	MTR		Meter Location	
Must Use	LCD05	66	Identification Code Qualifier	X	1 	ID 1/2	
 	SV		Service Provider Number	
Must Use	LCD06	67	Identification Code	X	1 	AN 2/17	
	Meter ID 

The data element maximum length indicated is reduced from that which is specified in the ASC X12 standards.	

	Segment:	LQ Industry Code Identification
	Position:	0490
	Loop:	PTD        Mandatory
	Level:	Detail
	Usage:	Optional (Must Use)
	Max Use:	>1
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	LQ01	1270	Code List Qualifier Code	O	1 	ID 1/3	
	Refer to "LQ Segments (Detail')" table for usage and values.	
Must Use	LQ02	1271	Industry Code	X	1 	AN 1/30	
	Refer to "LQ Segments (Detail')" table for usage and values.

Meter Status, Meter Type, Tap Location, Tap Type	

	Segment:	MEA Measurements
	Position:	0495
	Loop:	PTD        Mandatory
	Level:	Detail
	Usage:	Optional (Must Use)
	Max Use:	>1
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	MEA02	738	Measurement Qualifier	O	1 	ID 1/3	
	Refer to "MEA Segments (Detail)" table for usage and values.	
	MEA03	739	Measurement Value	X	1 	R 1/20	
	Refer to "MEA Segments (Detail)" table for usage and values.

Atmospheric Pressure, Chart Revolution Time, Machine Constant, Maximum Differential Pressure, Number Dials, Orifice Diameter, Reporting Pressure Base, Tube Inside Diameter, Volume Cycle	
	MEA04	C001	Composite Unit of Measure	X	1 		
Must Use	C00101	355	Unit or Basis for Measurement Code	M		ID 2/2	
	Refer to "MEA Segments (Detail)" table for usage and values.

Unit of Measure	
	MEA05	740	Range Minimum	X	1 	R 1/20	
	Refer to "MEA Segments (Detail)" table for usage and values.

Minimum Static Pressure Range, Temperature Range Minimum 	
	MEA06	741	Range Maximum	X	1 	R 1/20	
	Refer to "MEA Segments (Detail)" table for usage and values.

Maximum Static Pressure Range, Temperature Range Maximum 	

	Segment:	QTY Quantity Information
	Position:	1100
	Loop:	QTY        Optional (Must Use)
	Level:	Detail
	Usage:	Optional (Must Use)
	Max Use:	1
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	QTY01	673	Quantity Qualifier	M	1 	ID 2/2	
 	MS		Measured Quantity	
Must Use	QTY02	380	Quantity	X	1 	R 1/15	
	Measured Quantity	
	QTY03	C001	Composite Unit of Measure	O	1 		
Must Use	C00101	355	Unit or Basis for Measurement Code	M		ID 2/2	
	Unit of Measure	
 	BZ		Million BTU's	
 	G8		Gigacalories	
 	GV		Gigajoules	

	Segment:	MEA Measurements
	Position:	1600
	Loop:	QTY        Optional (Must Use)
	Level:	Detail
	Usage:	Optional (Must Use)
	Max Use:	40
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
	MEA01	737	Measurement Reference ID Code	O	1 	ID 2/2	
	Refer to "MEA Segments (Sub-detail)" table for usage and values.	
Must Use	MEA02	738	Measurement Qualifier	O	1 	ID 1/3	
	Refer to "MEA Segments (Sub-detail)" table for usage and values.

Component	
Must Use	MEA03	739	Measurement Value	X	1 	R 1/20	
	Refer to "MEA Segments (Sub-detail)" table for usage and values.

Coefficient, Component Value, Differential Pressure, Extension, Flow Period, Flow Rate, Heating Factor, Index Differential, Integrated Differential, Pressure Factor, Reporting Temperature, Specific Gravity, Static Pressure, Temperature, Volume	
	MEA04	C001	Composite Unit of Measure	X	1 		
Must Use	C00101	355	Unit or Basis for Measurement Code	M		ID 2/2	
	Refer to "MEA Segments (Sub-detail)" table for usage and values.

Unit of Measure	

	Segment:	DTM Date/Time Reference
	Position:	2100
	Loop:	QTY        Optional (Must Use)
	Level:	Detail
	Usage:	Optional (Must Use)
	Max Use:	10
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	DTM01	374	Date/Time Qualifier	M	1 	ID 3/3	
	Refer to "DTM Segments (Sub-detail)" table for usage and values.	
Must Use	DTM05	1250	Date Time Period Format Qualifier	X	1 	ID 2/3	
	Refer to "DTM Segments (Sub-detail)" table for usage and values.	
Must Use	DTM06	1251	Date Time Period	X	1 	AN 1/35	
	Refer to "DTM Segments (Sub-detail)" table for usage and values.

Beginning Flow Date, Ending Flow Date, Beginning Flow Time, Ending Flow Time, Date/Time On, Date/Time Off, Gas Analysis Effective Date	

	Segment:	LM Code Source Information
	Position:	2600
	Loop:	LM        Optional (Must Use)
	Level:	Detail
	Usage:	Optional (Must Use)
	Max Use:	1
Notes:		For NAESB WGQ, this segment is mandatory.

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	LM01	559	Agency Qualifier Code	M	1 	ID 2/2	
 	GI		Gas Industry Standards Board	

	Segment:	LQ Industry Code Identification
	Position:	2700
	Loop:	LM        Optional (Must Use)
	Level:	Detail
	Usage:	Optional (Must Use)
	Max Use:	100
Notes:		For NAESB WGQ, this segment is mandatory.	

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	LQ01	1270	Code List Qualifier Code	O	1 	ID 1/3	
	Refer to "LQ Segments (Sub-detail)" table for usage and values.	
Must Use	LQ02	1271	Industry Code	X	1 	AN 1/30	
	Refer to "LQ Segments (Sub-detail)" table for usage and values.

Adjustment Type, Business Period, Sample Device, Sample Type	

	Segment:	SE Transaction Set Trailer
	Position:	0300
	Loop:
	Level:	Summary
	Usage:	Mandatory
	Max Use:	1

Data Element Summary
	Ref.	Data	
	Des.	Element	Name	    Attributes    
Must Use	SE01	96	Number of Included Segments	M	1 	N0 1/10	
Must Use	SE02	329	Transaction Set Control Number	M	1 	AN 4/9